The use of manometers is given by each engineer
or manufacturers request. They are constructively
supplied in different material versions, though
the most common ones are the stainless steel
or ABS plastic versions. Its most common screws
are 1/8” (40mm and 50mm), 1/4”
(63 mm) and 1/2” (100 mm); on the other
hand, its display is generally made in acrylic
with pressure closing or in polycarbonate.
Assemblies can be with lower or back outlet
(panel). Pressure measurement will be indicated
according to the work pressure and the place
where it is located. Its measurement range
is most varied and it is subject to the client’s
request.
