Board
assembly. Models 32, 75, 100, 125 and 150.
Sizes: 3/8” and 3/4”, 1”
NPT and 1”1/4, 1”1/2 BSPT.
Due
to their design, retention valves in angle
have a quick closing response even in the
hardest working conditions. These valves have
no restrictions as regards their position
in the circuit and they are advisable to be
used when there is high flow volume speed.
- They are manufactured in five sizes for
the different flow volumes.
- There are three different pressures in the
free flow modality for each model.
- It is possible to change the pressure or
replace a coil without disconnecting the pipe.
- They are suitable to operate with flow volumes
ranging between 23 and 250 l/min and pressures
up to 210 kg/cm², according to the model
.
